WAYNE® Submersible Sump Pump, 120 V, 15 A, 60 Hz, 1/2 hp, 4300 gpm Flow Rate, 1 ph, 1-1/2 in Discharge, 8 ft Cord Length, Maximum Feet of Head: 20 ft, Thermoplastic Impeller, Steel, 10-1/2 in L x 9 in W x 11 in H, Epoxy-Coated
| Amperage Rating | : | 15 A |
| Cord Length | : | 8 ft |
| Dimensions | : | 10-1/2 in L x 9 in W x 11 in H |
| Discharge Size | : | 1-1/2 in |
| Finish | : | Epoxy-Coated |
| Flow Rate | : | 4300 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Impeller Material | : | Thermoplastic |
| Material | : | Steel |
| Maximum Feet of Head | : | 20 ft |
| Phase | : | 1 ph |
| Voltage Rating | : | 120 V |
- Assembled in the US with foreign and domestic parts
- Tested to 1 million cycles, for performance that lasts, WAYNE pumps exceeds an average life of 1 million cycles
- Durable epoxy-coated and reinforced thermoplastic construction, for long life in tough sump applications
- High performance, max flow rate is 4300 gph, 3360 gph at 10 ft of discharge lift
- Integrated vertical float switch with solid, leak-free polypropylene float for automatic operation, 9 in ON level and 4 in OFF level
- No need for weep holes, unique top suction design reduces clogging and prevents air lock condition
- Engineered with upper and lower ball bearings, in sealed oil bath for virtually silent operation
- Designed with premium john crane carbon/ceramic shaft seals for quality that lasts
- Cast iron seal plate prevents leaks and galvanic corrosion
- 1-1/2 in NPT discharge for compliance with building codes
- Float guard, protects switch from hang-ups from debris and side of pit
- Abrasion-resistant glass reinforced polycarbonate impeller for reliability
- 8 ft water-resistant power cord provides easy access to nearby GFCI protected outlet
- For easy installation, use in 11 in Dia or larger sump basins
Instruction/Installation Manual