Bradford White® Electric Water Heater, 40 gal Capacity, 54 gph First Hour Delivery, 0.93 Energy Factor, 21 gph Recovery Rate, 2 Elements, 4500 W Element Wattage, 240 V, 1 ph Phase, NPT Connection, 3/4 in Connection, 150 psi, Lead-Free, 22 in Dia x 48-5/8 in H
| Additional Information | : | Electric-Resistance Fuel |
| Capacity | : | 40 gal |
| Connection Size | : | 3/4 in |
| Connection Type | : | NPT |
| Dimensions | : | 22 in Dia x 48-5/8 in H |
| Domestic/Import | : | Domestic |
| Element Type | : | Screw-In |
| Element Wattage | : | 4500 W |
| Energy Factor | : | 0.91 |
| First Hour Delivery | : | 49 gal |
| Lead-Free/Contains Lead | : | Lead-Free |
| Mounting Type | : | Floor |
| Number of Elements | : | 2 |
| Phase | : | 1 ph |
| Pressure Rating | : | 150 psi |
| Recovery Rate | : | 21 gph |
| Thermostat Type | : | Automatic |
| Voltage Rating | : | 240/208 V |
- Transfers heat directly and efficiently to the water, screw-in style
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Protective magnesium anode rods provides added protection against corrosion for long, trouble-free service
- Factory installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Factory installed Hydrojet® total performance system
- Durable tamper-proof design low restriction brass drain valve
- Non-simultaneous operation, these heaters are wired inter locking
- Temperature and pressure relief valve included
- Fast acting surface-mount thermostat with high-limit energy cut-off (manual reset) for safety
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
Instruction/Installation Manual