Bradford White® Gas Water Heater, 50 gal Capacity, 35000 Btu/hr, 10.3 kW, 86 gph First Hour Delivery, 0.65 Energy Factor, 41 gph Recovery Rate, 80 % Efficiency, 3 x 4 in Vent, NPT Connection, 150 psi, Propane Gas Fuel, Piezo Ignition System, Lead-Free, 22 in Dia x 60-5/16 in H x 25-1/2 in D
| BTU Rating | : | 36000 Btu/hr |
| Capacity | : | 50 gal |
| Connection Type | : | NPT |
| Dimensions | : | 22 in Dia x 60-1/8 in H x 25-1/2 in D |
| Domestic/Import | : | Domestic |
| Efficiency | : | 80 % |
| Energy Factor | : | 0.63 |
| First Hour Delivery | : | 81 gal |
| Fuel Type | : | Liquid Propane Gas |
| Ignition System | : | Piezo |
| Ignition Type | : | Piezo |
| Lead-Free/Contains Lead | : | Lead-Free |
| Mounting Type | : | Floor |
| Power Rating | : | 10.6 kW |
| Pressure Rating | : | 150 psi |
| Recovery Efficiency | : | 80 % |
| Recovery Rate | : | 41 gph |
| Temperature Rating | : | 160 deg F |
| Vent Size | : | 3 in, 4 in |
| Vent Type | : | Atmospheric |
- Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
- Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- An exclusive green LED light prompts the installer during startup and provides 10 different diagnostic codes to assist in troubleshooting
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- Protective magnesium anode rod
- Factory installed heat traps
- Factory installed Hydrojet® total performance system
- Advanced ScreenLok® technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
- Flashing green LED provides positive indication that pilot is on
- High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Pedestal base
- No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- 3 x 4 in snaplock draft diverter
- Less than 40 ng/J NOx emissions
Catalog