Bradford White® Electric Water Heater, 28 gal Capacity, 46 gph First Hour Delivery, 0.92 Energy Factor, 21 gph at 90 deg F Temperature Rise Recovery Rate, 2 Elements, 4500 W Element, 240 V, 1 ph Phase, NPT Connection, 3/4 in Connection, 150 psi, Lead-Free, 22 in Dia x 30-3/4 in H
| Capacity | : | 28 gal |
| Connection Size | : | 3/4 in |
| Connection Type | : | 3/4 in NPT Water and Electrical |
| Dimensions | : | 22 in Dia x 30-3/4 in H |
| Element Wattage | : | 4500 W |
| Energy Factor | : | 0.92 |
| First Hour Delivery | : | 46 gph |
| Lead-Free/Contains Lead | : | Yes |
| Number of Elements | : | 2 |
| Phase | : | 1 ph |
| Pressure Rating | : | 150 psi Working, 300 psi Test |
| Recovery Rate | : | 21 gph at 90 deg F Temperature Rise |
| Voltage Rating | : | 240 V |
- Transfers heat directly and efficiently to the water, screw-in style
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Protective magnesium anode rods provides added protection against corrosion for long, trouble-free service
- Factory installed Hydrojet® total performance system
- Durable tamper-proof design low restriction brass drain valve
- Non-simultaneous operation, these heaters are wired inter locking
- Temperature and pressure relief valve included
- Fast acting surface-mount thermostat with high-limit energy cut-off (manual reset) for safety
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Blanketed model provide more installation flexibility and are ideal for replacement applications
- Factory installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Include supplied insulation blanket (2 in thick)
Specification Sheet